Company
ST Home | Evaluation Boards | System Evaluation Boards for Motor Control | EVAL6208PD

EVAL6208PD
L6208 DMOS Driver for Bipolar Stepper Motor in PowerSO Package

 Features and Description  Technical Documentation  Resources
 Key Products  Related Information
Purchase EVAL6208PD
 
Features and Description
OPERATING SUPPLY VOLTAGE FROM 8 TO 52V
5.6A OUTPUT PEAK CURRENT (2.8A RMS)
RDS(ON) 0.3W TYP. VALUE @ Tj = 25°C
OPERATING FREQUENCY UP TO 100KHz
NON DISSIPATIVE OVERCURRENT PROTECTION
DUAL INDEPENDENT CONSTANT tOFF PWM CURRENT CONTROLLERS
FAST/SLOW DECAY MODE SELECTION
FAST DECAY QUASI-SYNCHRONOUS RECTIFICATION
DECODING LOGIC FOR STEPPER MOTOR FULL AND HALF STEP DRIVE
CROSS CONDUCTION PROTECTION
THERMAL SHUTDOWN
UNDER VOLTAGE LOCKOUT
INTEGRATED FAST FREE WHEELING DIODES

Click for larger imageThe EVAL6208PD is built around L6208 in PowerSO package. It implements a typical stepper motor driver application. Screw connectors provide connection to motor supply rail and 5 V reference for the logic inputs, as well as the four outputs to motor windings. EVAL6208PD can be hooked-up to practiSPIN interface board (EVALpractiSPIN) through a 34-pin connector. It is also possible to run board in stand-alone mode: four switches are used to set the direction of the rotation, the stepping sequence and the current decay style, while four potentiometers set the L6208 reference voltage and off-time for the PWM current control; external reference voltages can be provided by a PWM output of a µC.

Technical Documentation
Application Note
/User Manual		 Download
Resources
Gerber Files Download (28-November-2007, 243 KB)
Schematics Download (28-November-2007, 62 KB)
Key Products
L6208 
Purchase
Purchase EVAL6208PD

Related Topics
Product Selector and Datasheets
Evaluation Boards
Support
Contact Technical Support
Application Notes